Antec Performance One
by Purav Sanghani on February 13, 2005 12:05 AM EST- Posted in
- Cases/Cooling/PSUs
Introduction
It has been over two years since we have looked at an Antec product. In January of 2003, we included Antec's True430, their mid-range power supply at the time, in the TruePower series. We now have our hands on the Performance One, or P160 aluminum case from Antec. Antec claims the P160 to be a "Super" mid-tower chassis and we'd like to find out exactly what they mean by that.
There's no question that Antec produces some high quality, high performance products. It is one of the biggest names in the industry, especially when it comes to power supplies and PC cases. We have received many requests to review various Antec products and we finally have our chance.
| Antec Performance One P160 | |
 |
Included Features |
| - Rotating auxiliary module w/temperature display - Tool-less drive bays - Removable motherboard tray - Security features |
|
| Improvements Needed | |
| - Drive rails for hard drive bays - Two standard 120mm fans |
|
Keep these features and possible improvements in mind as we take the P160 out of its box and look deeper into the aluminum chassis from Antec.
More information is available on the P160 at Antec's website.
Facebook
Twitter
RSS
53 Comments
View All Comments
ElFenix - Sunday, February 13, 2005 - link
thanks for reviewing a professional looking case =)ViRGE - Sunday, February 13, 2005 - link
I too own this case and would like to make a couple of comments:1) I agree partially that it's a flimsy case. This isn't something Antec did wrong, rather it's just something that comes with using Al. If you're moving from a standard steel case, care is required. Also, the last time I swapped out an optical drive, I had issues with the rail effectively getting stuck in place; I don't know if I had some warping or what, but it was a fairly concerning problem.
2) The case cools fine with just the included fan. I ran a AXP 2600+ system just fine with the stock setup, though I did add a second fan later on when I added some more hard drives, and wanted to force more air across them. I don't know if this holds true for A64/P4 setups though.
3) The rear fan could be better. Antec ships the case without the fan installed, so you need to install it yourself. The pre-install some sort of rubber fastener on the fan, the idea being that like the grommets on the HD trays, the fasteners will reduce noise, but it also makes the fan difficult to install if you haven't installed a fan with them before. The problem is that when I pulled through the first one, it ripped, so I had to put a screw on in place. There's a very specific amount of force required to pull it through and not rip it, and there's no way to know until you've tried, likely ripping one in the process.
4) The washable air filter rocks. It won't keep out all the dust in your system, but it greatly reduces the amount of dust that needs to be removed from the system, and the filter is a snap to remove and clean, which means less work in the end.
5) I can't say enough praise for the "auxiliary port module." I keep my P160 at the foot of my desk, so it's at the perfect height to reach stuff, whereas anything lower would require actually bending down to use. The Firewire port is a very nice touch too, though wiring it up is difficult since it requires manually placing 7 pins(not that Antec could have done better since there isn't a standard).
6) I should probably mention customer service. I got rid of my floppy drive a few months back and needed a plain 3.5" bezel to replace the floppy one; I asked Antec where I could get one, and they sent me one for free, no questions asked.
In the end, it's a very good luxury case, and I don't see myself replacing it for some time. I just wish Antec had included a power supply.
PrinceGaz - Sunday, February 13, 2005 - link
That looks like a very nice functional case, rather like the Al Lian-Li waiting for my next build.It would be good if you could still review some stupid looking cases as the comments readers post are always amusing (even if like most of us I never read past the first page of the review of those attrocities) ;)
phaxmohdem - Sunday, February 13, 2005 - link
I went to MIcro Center to purchase a GAming Bomb II when it first came out and nearly shat my pants when I compared prices and features between that and this P160. Needless to say I am the proud owner of this P160 case and couldn't be happier with it.The rubber grommets on the HDDS keep my raptops eerily silent. Highly recommended
Ovven - Sunday, February 13, 2005 - link
i think i'll stay with my Antec Sonata case :)cHodAXUK - Sunday, February 13, 2005 - link
Great review, I own a P160 myself and I completely agree with the authors conclusions. For those people saying it is cheap and nasty well at it's price point ($115) it is by far the best constructed aluminium case around and it looks flashy whilst remaining easy on the eye. The front of the case is an aquired taste sure, but cheap it is not and I am certain that most people will like it. I base that of what people have actually said when they saw my P160 for the first time, after having my P160 for 9 months I still find it attractive and from a practical standpoint it has been a superb case to work on.semo - Sunday, February 13, 2005 - link
hallelujah!someone at anandtech must have eradicated those demonic objects of evil that have often appeared in articles here, slowly consuming the soul of its reviewers.
drifter106 - Sunday, February 13, 2005 - link
someone will let me know if this is wrong to post, but... if can be found using pricegrabber for less than 114.00 ship...strike with me with a wet noodle if i did a no-no
drifter106 - Sunday, February 13, 2005 - link
thanks for the review. this was my choice until i came across the stacker.CrystalBay - Sunday, February 13, 2005 - link
Does it cool adequately with the single provided fan???