P182 Special Edition - One of the best cases gets better
by Joshua Buss on April 12, 2007 1:00 AM EST- Posted in
- Cases/Cooling/PSUs
Installation
To finish our look at the special edition of the P182, here are a few pictures from the installation of our new test bed.
A plastic grill is included with the case to prevent objects from covering up the rear top fan and thus render it useless. Also notice the switches for the two fans mentioned earlier.
The main hard drive cage is simple and easy to use, and plenty of long screws are provided to make installing the drives worry-free.
Optical drives and other 5.25" drives are installed with rails, which certainly work well. Enough rails are provided for all four bays to be filled.
In addition to holding two sleds for more hard drives, the other drive cage also has a small accessory box on its backside for storing extra case screws and whatnot. Nice.
A picture of our test bed almost totally installed once again shows the adequate but not really ample room inside the P18x series of cases. It's a case that's really just as big as it needs to be to hold a moderate desktop configuration. Thankfully, it is big enough for large coolers like the popular Zalman CNPS 9500.
To finish our look at the special edition of the P182, here are a few pictures from the installation of our new test bed.
 |
| Click to enlarge |
A plastic grill is included with the case to prevent objects from covering up the rear top fan and thus render it useless. Also notice the switches for the two fans mentioned earlier.
 |
| Click to enlarge |
The main hard drive cage is simple and easy to use, and plenty of long screws are provided to make installing the drives worry-free.
 |
| Click to enlarge |
Optical drives and other 5.25" drives are installed with rails, which certainly work well. Enough rails are provided for all four bays to be filled.
 |
| Click to enlarge |
In addition to holding two sleds for more hard drives, the other drive cage also has a small accessory box on its backside for storing extra case screws and whatnot. Nice.
 |
| Click to enlarge |
A picture of our test bed almost totally installed once again shows the adequate but not really ample room inside the P18x series of cases. It's a case that's really just as big as it needs to be to hold a moderate desktop configuration. Thankfully, it is big enough for large coolers like the popular Zalman CNPS 9500.
Facebook
Twitter
RSS
63 Comments
View All Comments
kellehair - Thursday, April 12, 2007 - link
Anybody have a list of differences between the 180 and the 182? I have the 180 already but would consider upgrading, assuming it really is an upgrade.cbuchach - Thursday, April 12, 2007 - link
Yes, I own a P180. The case is great except for the fact that all the cables from the bottom power supply/hard drive compartment route through the panel opening. The new cable routing features, instead of the mirror finish should have been the focus as in my opinion this is the best update to the case.Sunrise089 - Thursday, April 12, 2007 - link
Did I miss the pricetag for this special finish model?Also, how many fans are being used? It looks like you have the top and rear fans installed, plus another 120mm between the lower HD cage and the power supply. But what about the two front fans, in the upper and lower compartments?
Richey02hg - Thursday, April 12, 2007 - link
yes you did, last page i believe it says 229 (yikes!)Sunrise089 - Thursday, April 12, 2007 - link
Nope, that was added after the article was posted.JoshuaBuss - Thursday, April 12, 2007 - link
newegg has it for $230, as mentioned by someone else in the comments here.JarredWalton - Thursday, April 12, 2007 - link
Not the SE version, but the standard P182 is a lot more readily available (and cheaper):http://www.atacom.com/program/print_html_new.cgi?c...">ATACOM $130 + shipping
http://www.etech4sale.com/ANTEC_PERFORMANCE_ONE_SE...">Etech4Sale $125 + shipping
http://www.excaliberpc.com/ANTEC_PERFORMANCE_ONE_S...">ExcaliburPC - $127 + shipping
http://www.computerbrain.com/applications/search/i...">Computer Brain - $132 + ship
No idea if these guys are safe or not, but I also found the P182SE for $191 + shipping from http://ozdirect.com/product_info.php?products_id=6...">OZDirect
http://froogle.google.com/froogle?q=antec+p182&...">Froogle is your fried! :)
yyrkoon - Sunday, April 15, 2007 - link
ATACOM should be, I've ordred from them before. ExcaliburPC IS safe, as is computerbrain, never heard of etchforsale, and anyone putting numbers in their business name, can not be all that sophisticated, now can they ;)Anyhow, look on resellerreview . . .
nicolasb - Thursday, April 12, 2007 - link
> Also, how many fans are being used?Like the P180, the case comes with three fans, but there are mounting points for another two if you really want to go nuts....
Can anyone tell me what the dimensions of the PSU compartment are? It'd be nice to know which 750W-850W PSUs will actually fit into this case.
giantpandaman2 - Thursday, April 12, 2007 - link
It's a bit of a lower end case, but, shockingly enough, it actually does come with hard drive suspension gear. I picked it up for $60 at a Fry's sale. It's definitely not as pretty as the P180's that were sitting next to it, but I couldn't believe I how cheap I was getting a tooless, quiet (comes with modest sound dampening material) case w/4 HDD suspension mounts and dual air filters. Obviously there's much better cases out there, but not for $60. The only thing it lacked was a front intake fan, easily solved for another $10 though.